DeviceNet Diagnostic Faceplate For RSView ME (SE)
DeviceNet Diagnostic Faceplate in a ControlLogix file allows you to load, configure, and use pre-configured status and diagnostic displays or “faceplates” for a DeviceNet network using FactoryTalk View. These “faceplates” rely on pre-programmed, ready to use ladder logic in the ControlLogix. The following quote is from the User Instruction that comes with the faceplate package: [...]
DeviceNet Network Installation Checklist
If you are setting up your DeviceNet network or it is not working properly go through the following checklist. It will fix your problem 95% of the time. Termination resistors. ( 1 at each end of trunk ). Grounding of Network. ( One location only ). Cumulative drop line budget in spec. for selected baud [...]
DeviceNet Thick Cable Communication Media
DeviceNet network can use Thick Cable, Thin Cable, and Flat Cable types for communication. Some of the features and qualities of the thick cable type used in DeviceNet networks are: The Signal pair (#18) is the blue/white wire Power pair (#15) is the black/red wire PVC/nylon insulation on power pair Industrial temperature range Storage: -40o [...]